When possible reposition the collar on your pets neck every 1 to 2 hours. Remove the collar after each training session. Some examples are: CAUTION:Be sure the extra collar does not put pressure on the contact points. Place the boundary switch on Low if the boundary zone will be less than 45 feet from the transmitter. He still is oopsing and making the collar beep but heads for the house. 2 I had to stand still to feel, 3 was maybe annoying. Charging too often can reduce battery life. The receiver charge jack and receiver charger are keyed to fit one way. This product worked excellent for keeping them on my property. Finish each training session on a positive note with lots of praise and play. The boundary zone must be tested whenever an adjustment is made to the transmitter setting to prevent unintended corrections to your pet. Use the fence transmitter indoors in a dry location only. Do not place the transmitter on or near a metal surface. Increase the static correction level by pressing and releasing the mode button within 5 seconds of the previous series of flashes. Claims Procedure: Any claim made under this Warranty should be made directly to Radio Systems Australia Pty Ltd.Customer Care Centre at:Radio Systems Australia Pty Ltd.PO Box 3442Australia Fair QLD 4215, AustraliaAustralia Residents: 1800 786 608New Zealand Residents: 0800 543 054Email: [emailprotected]. This device contains Lithium-Ion (Li-Ion) batteries; never incinerate, puncture, deform, short-circuit, or charge with an inappropriate charger. Play with your pet for a while during the first few sessions. Allow your pet to cross the boundary (7B) and hear the tone from the collar, then ask him to come back into the pet area (7C) and praise and reward him. Held it in my hand for 2 and 3. Do not place anything on top of the transmitter or cover any ventilation holes. Never shave your pets neck; this may lead to a rash or infection. Make sure the receiver collar battery is properly charged. PETSAFE Stay & Play Compact Wireless Fence, PIF00-12917, Skip to the beginning of the images gallery. Taking Your Pet Out of the Pet AreaImportant: Remove the receiver collar and leave it at home.Once your pet learns the boundary zone, he will be reluctant to cross it for walks or car rides.Option 1:Replace the receiver collar with a regular collar. If theoptions are not possible, please contact the Customer Care Center for further information. Use the long contact points for pets with long or thick hair. Recharging the battery outside of this temperature range can cause the battery to overheat, explode or catch fire. You should expect hundreds of recharge cycles from your battery; however, do not charge your receiver collar every night. If he escapes, remove the collar and lead him back into the pet area. At the end of the product life, do not place it in the normal municipal waste system. You may need to trim the hair in the area of the contact points. Be sure to place the collar on your dogs neck with the PetSafe logo facing up. Turn the Receiver Collar OFFPress and hold the mode button continuously for 5 seconds. The battery in your receiver collar is sealed, in addition, your collars housing is also sealed. The receiver collar tone is soundingeverywhere. The intermittent double tone is the metal interference alarm. Dog are sensitive. You may initially need to convince your pet to leave the pet area with a treat and lots of praise.Note: You may also carry your pet out of the pet area.Congratulations! Save them in case you move or need to train another pet. If you have any questions, please dont hesitate to contact us.Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia Pty Ltd., and any other affiliate or Brand of Radio Systems Corporation may be referred to collectively as We or Us. The transmitter is powered by a standard 120-volt outlet.Boundary Switch: Adjust according to the size of the pet area desired.Note: Adjusting the switch does not change the level of static correction on the receiver collar.Boundary Control Dial: Adjusts the distance from the transmitter to the boundary zone.Note: Adjusting the dial does not change the level of static correction on the receiver collar.Alarm Disable Button: Silences power loss alarm and re-initiates the transmitter radio signal after metal interference alarm activates.Power Loss Alarm: Sounds an intermittent single tone alarm which indicates power has been removed from the transmitter.Metal Interference Alarm: Disables the transmitter radio signal to protect the transmitter from damage if placed too close to metal objects.Transmission Failure Alarm: Continuous tone which indicates a transmitter problem. Contact the Customer Care Center for a replacement transmitter. Refer to the function and response table to choose the static correction level that best fits your pet. Make sure receiver collar is turned on and battery status lights are flashing every 4-5 seconds. You may have turned the boundary control dial down too quickly, causing the receiver collar to go into power-fail mode. The receiver collar tone is not sounding or administering a static correction. Risk of electric shock. It is important that you reinforce training with your pet on a regular basis. Receiver Collar Status IndicatorsThe receiver collar status indicator light along with the receiver collar alarm tone is used to determine the battery status and the correction type. If he does not respond, check the fit of the collar to make sure the contact points are making contact with his skin. Please check the regulations in your area or return it to where it was purchased so that it can be placed in our recycling system. The receiver collar tone is sounding inside the house. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.Should you have any queries or require any further information, please contact our Customer Care Centre on 1800 786 608 (Australia) or 0800 543 054 (New Zealand). Contact the Customer Care Center. Pushing the correction level button while the receiver collar is on level 6 will cause the receiver collar to revert to level 1. Therefore, if you have reason to believe that your pet may pose a danger to others or harm himself if he is not kept from crossing the boundary, you should NOT rely solely upon this system to confine your pet. LOW HIGH. Charge the Receiver CollarLift and slide the receiver collar strap away from the front of the unit (2A). Your goal is for your dog to associate being inside the pet area with rewarding experiences. One caution: Do not put your dog in a vehicle while wearing the collar as it will trigger even well within the range of the transmitter. The green or yellow or red receiver indicator light will turn ON for 5 seconds (3C) to indicate battery status, followed by the red receiver indicator light flashing the static correction level settings. Relocate the interfered receiving antenna. My dog is enjoying his yard with out me yelling at him to come back from greeting neighbors, their dogs, or just adding my neighbors yards his own idea of his territory. Copyright 1995-2022 eBay Inc. All Rights Reserved. With the receiver collar within 10 feet of the transmitter, readjust the boundary control dial as shown in Step 4 and reset the boundary zone, making sure to turn the dial down slowly. CAUTIONPlease read and follow the instructions in this manual. Radio Systems goods come with guarantees that cannot be excluded under the Australian Consumer Law. Contact the Customer Care Center at +1 (800) 732-2677. The PetSafe Stay & Play Compact Wireless Fence system has been proven safe, comfortable, and effective for petsover 5 pounds. She made a second pass toward the street, heard the tone and stopped. This fence comes with a rechargeable PetSafe Stay & Play Wireless Fence Receiver Collar. Repeat this process until the receiver collar tone sounds at the desired location. When this alarm sounds, the transmission output is disabled and your pet is no longer being contained. Transmitter: Transmits the radio signal and is the center of the pet area. A receiver collar worn for too long or made too tight on your pets neck may cause skin damage, ranging from redness to pressure ulcers. Metal Interference AlarmThe metal interference alarm sounds like an intermittent double tone alarm indicating that the transmitter has been set towards the maximum range and placed on or close to a metal surface. 2 I had to stand still to feel, 3 was maybe annoying. Proper fit of the collar is important. Stay close by with a leash at hand. 3/4 Acre of Circular Coverage - The adjustable circular range allows up to 3/4-acre of coverage (22-105 ft in all directions) from the placement of the indoor transmitter, No Wire to Bury - A wireless boundary allows you to create a safe barrier around your yard to protect your pets without spending time burying wires, 5 Levels of Correction - The system features 5 levels of static correction plus a tone-only mode, Static-Free Reentry - Allows your pet to return home without being corrected if your pet passes the boundary, Stay & Play Collar - System comes with 1 waterproof, rechargeable receiver collar that comfortably fits dogs 5 lb. Download DIRECTV R16 Receiver. The goal is to have your pet stay within the boundary even with new temptations. The receiver collar will activate within 2 to 3 feet of the boundary flags. The fit should be snug but not constricting (6B). The transmitter has a built-in transmission failure alarm that continuously monitors the transmitter output. Follow the setup procedures (Steps 1 through 4) wherever you wish to have containment of your pet. Once your pet consistently respects the boundary zone regardless of distractions or temptations, he is ready for the next step: unleashed supervision (7D). I was disappointed with the area until I realized it was on low. This may overheat the transmitter and cause early transmit failure. To turn off the power loss alarm, unplug the power adaptor from the power jack located on the bottom of the transmitter or press the alarm to disable the button for 5 seconds then release it. It is designed to act as a deterrent to remind pets to remain within the established boundary by use of static correction. Neither dog has gotten a second shock. If your dog does not try to cross the boundary zone, occupy yourself with another task in the yard, and allow him to freely explore. This equipment must be recycled. When your pet reaches the boundary zone, the receiver collar gives a warning tone before delivering a safe static correction through the contact points to get his attention until he returns to the pet area. Hold the receiver collar about waist high until the receiver collar tone sounds and the test light flashes. The battery should be charged in areas with temperatures ranging from 32F to 104F / 0C to 40C. Step 6: Fit the Receiver CollarImportant: The proper fit and placement of your receiver collar is important for effective training. If the Product is deemed to be faulty within 30 days from date of original purchase, Radio Systems will organize for a replacement to be sent in advance of returning the faulty Product. It's working! Start with simple temptations and work your way up. The transmitter is located at the exact center of the pet area. The energy in an output pulse is only a few thousandths of a Joule; it is similar in nature to the static pulse that you may feel when getting out of your car. We purchased an additional unit for our son to use with his dog and she learned the limits in less than a day. Hold the test light contacts to the contact points. However, if you follow the training schedule provided with the system, it makes it pretty easy for any dog to learn. Start these sessions at about 15 minutes and gradually work up to an hour or more.When your pet proves trustworthy, you can let him out on his own. Treat, praise, play. More frequent short sessions are better than lessfrequent, longer sessions. Step 5: Place the Boundary FlagsThe boundary flags are visual reminders for your pet of where the boundary zone is located. He still is oopsing and making the collar beep but heads for the house. If the receiver collar tone sounds before or after the desired boundary zone, return to the transmitter and adjust the boundary control dial. A collar worn for too long or made too tight on the pets neck may cause skin damage ranging from redness to pressure ulcers; this condition is commonly known as bed sores. item 1 Petsafe Stay and Play Wireless Pet Fence (PIF00-12917), item 2 Petsafe Stay and Play Wireless Pet Fence System (PIF00-12917), item 3 PetSafe stay & play compact wireless PIF00-12917 W/Collar & Charger #24 0089, item 4 Petsafe Stay and Play Wireless Pet Fence (PIF00-12917) Open Box Read, item 5 Petsafe Stay and Play Wireless Pet Fence (PIF00-12917) Open Box, item 6 Pet Safe Stay & Play Compact Wireless Pet Fence Extra Transmitter, item 7 Petsafe Stay and Play Wireless Pet Fence (PIF00-12917), 4.5 out of 5 stars based on 136 product ratings. Check tightness weekly. You are both ready to enjoy more freedom. Over Correction ProtectionIf your pet enters the boundary zone or continues anywhere beyond the pet area, this feature limits the static correction duration to 15 seconds. The receiver collar tone is not sound when setting up the boundary zone. Step 4: Adjust the Pet Area to Desired SizeMake sure the entire pet area lies within your property boundaries (4A). This Limited Warranty excludes accidental damage due to dog chews; lightning damage; or neglect, alteration, and misuse.Consumers who purchase products outside of Australia, New Zealand, or from an unauthorized dealer will need to return the Product to the original place of purchase for any warranty issues.Please note that Radio Systems does not provide refunds, replacements, or upgrades for change of mind, or for any other reason outside of these Warranty terms. Very quiet beep. The metal crate may block the transmitter signal which causes the receiver collar to activate. In a dry, well-ventilated, protected area. This equipment has been tested and found to come with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Plug the adaptor into a functional 120-volt outlet. Frequent charging can have a negative effect on the battery. Continue watching your pet. Step 1: Set Up the TransmitterImportant: You may need to move the transmitter several times before determining the final location. Walk back into the pet area until the receiver stops sounding. It is used to alert you to potential personal injury hazards. I unplug and take the collar off when in the house since I had read about the electric bill . The receiver collar activates in the middle of the yard. Do not force it in backward. But it works great she stops at the beep. Refer to the receiver collar status indicator table below to understand the status lights and tones for the receiver collar.During normal operation, the receiver collar indicator light will flash every 45 seconds to indicate the battery status as shown in the table below. If you want to power the transmitter from a car or other DC source, use an inverter rated for 50 watts or more. Using a 900 VA UPS a consumer could expect 8 hours of backup time. Charge your receiver collar when the receiver indicator light blinks yellow; or when the light blinks red. Contact the Customer Care Center for a replacement. If necessary, add in more days of training before moving on to the next step. WarrantyOne Year Non-Transferable Limited WarrantyThis Product has the benefit of a limited manufacturers warranty. The transmitter is sounding an intermittentdouble tone alarm. This alarm sounds if the transmitter is placed too close to a metal surface. Check that the transmitter is plugged into a working standard 120-volt outlet, the power light is on, and the transmitter controls are set at your desired settings. Bring the receiver collar within 10 feet of the transmitter to reset. Make sure no continuous alarm is sounding on the transmitter. Everything works great but I cant keep it on high ( which is farther for dog to wonder) because it makes a humming noise and it gets hot, so I switch it to low when shes inside. Avoid leaving the collar on the dog for more than 12 hours per day. For the best experience on our site, be sure to turn on Javascript in your browser. Do not place the transmitter in a closet or any other confined, unventilated area. Power outages can be unpredictable, and the use of a UPS will provide you with some time to properly restrain your pet. They were not coming back when called and I was afraid that they were going to get hit by a car. Without proof of purchase, Radio Systems will not repair or replace faulty components. This condition is commonly known as bed sores. The red receiver indicator light will be ON during this time.The red receiver indicator light will then turn OFF and all receiver indicator lights will stay OFF indicating that the unit isturned OFF.To extend the time between charging the receiver collar, consider turning OFF the receiver collar when it is not in use. When serviced by Radio Systems Customer Service, RadiSystems covers labour and parts for the first year of ownership; after the first year, a service or upgrade charge will apply relative to replacement of the product with new or refurbished items at Radio Systems sole discretion.The limited warranty is non-transferable and shall automatically terminate if the original retail consumer purchaser resells the Radio Systems product or transfers the property on which the Radio Systems product is installed. Do not try todo too much tooquickly. Radio Systems Corporation recommends the use of an Uninterruptible Power Supply (UPS) for use with your wireless fence. This may activate the receiver collar. Ships same or next day free with warranty Petsafe Stay and Play Wireless Pet Fence (PIF00-12917) Open Box. Plug the receiver charger into the receiver charge jack on the receiver collar. If this continues to occur, consider relocating the transmitter and resetting the pet area. Start with your pet standing comfortably (6A). Step 3: Prepare the Receiver CollarYour receiver collar comes with short contact points. Open box, but unused. The receiver collar has injured my pets neck. Takes a while to flag it but no different than the buried system and not near the work I know I put one in years ago. Your neighbors containment signal may interfere with the operation of the receiver collar preventing activation close to their fence. Make sure the power adaptor is plugged into a working 120-volt wall outlet. Verify that the outlet is working properly by plugging in a known working item such as a lamp. If the power light still does not come on, the fence transmitter and/or power adaptor need to be replaced. Turn the Receiver Collar ONPress and hold the mode button continuously for 5 seconds (3B). Repeat this process around the boundary zone until it is marked with boundary flags every 10 feet. Three short tones will sound to signify the alarm has been turned off. This product is not a toy. This light also indicates battery status.Contact Points: Deliver the safe static correction when your pet moves into the boundary zone.Mode Button: Turns receiver on/off and adjusts the level of static correction your pet receives outside the pet area.Receiver Charger: Charges the batteries inside the receiver collarReceiver Charge Jack: Connection point for charging receiver battery.Power Light indicates when the transmitter is on.Power Jack: Where the power adaptor plugs into the transmitter. The collar has a tone-only mode plus 5 levels of adjustable static correction depending on your dogs temperament. Do not place anything on the top of the transmitter or cover any ventilation holes. WelcomeYou and your pet were made for each other. Post in the comments! My pet reacts strongly to the static correction and has become fearful. If the Product is deemed to be faulty after 30 days from the date of original purchase, the consumer will be required to return the Product to Radio Systems at the consumers own expense.